Year: 2022 Version: 4.2.0.133 Developer: Nobeltec & MaxSea Platform: Windows System Requirements: The following system requirements must be fulfilled to run TimeZero v4 Navigator: Microsoft® Windows® 7 SP1, or Windows® 8.1 or Windows® 10 1.5 GHz processor (Intel i5 recommended) 4GB RAM Video card: Minimum - Integrated Intel Graphic Chipset (HD Series) Recommended - Dedicated Graphics with 1GB VRAM or Intel HD 4th Generation or above Screen resolution: 1024 x 600 (1280 x 800 or higher recommended) Hard Drive: 30 GB free space A USB port or a Serial port for instruments using the NMEA183 protocol, an Actisense USB NGT-1 for those using the NMEA2000 protocol or a 100 Base-T Network Card for devices connected by Ethernet (such as the Furuno FA30, etc.) Localization: english Crack: Included Description: The functionalities of the TZ Navigator navigation software have been developed with two major objectives: total control and user comfort and with the following optimization axes: safety and simplicity. TimeZero technology benefits from global coverage and smooth and fast mapping in which mapping, 3D data and aerial photos are merged. The user interface is intuitive and suitable for use on touch screens. Via a simple Ethernet connection, it is compatible with any Furuno NavNet system. This makes it possible to superimpose the radar image directly on the map (optional TZ Radar module) or to take advantage of the features of the Furuno sonars on the PC: real-time ultrasound, fish detection, bottom discrimination (optional TZ sonar module). In a motorboat, advanced route management, safety cone and AIS functions allow a serene sea trip without laborious preparation. When sailing, the TimeZero navigation software allows you to plan and enjoy beautiful sailings safely thanks to its many tools (WP, roads, tides, weather forecasts, AIS/ARPA function). With the optional weather routing module, it is possible to calculate the best route based on the weather forecast and the polars of the boat. Additional info: On windows defender , allow The Keygen MaxLicV4Nav. and MX_TZ v4PRO_crack_SplahScreen before downloading. Installation instructions: 1.Turn off internet connection 2.start the installer "InstallNavigator4.2.0.133" ,when installtion completed uncheck the "Do you want to Run TimeZero" and close the popup window. 3.Run "MX_TZ v4PRO_crack_SplahScreen.bat" and press continue. it will automatically close. 4.Run "Block Host.cmd" to avoid the UM code issue every time you execute TIMEZERO. 5.Run the keygen "MaxLicV4Nav.exe" and TZ4 application . generate your serial number and put it on tz , press next you will see the SC code on the second window copy paste in the keygen and generate the AC code. Congratulation installation completed. enjoy it. Note: The keygen allow you to generate the chart serial key. Big thanks to all contributors from https://www.gpspower.net/ forum .
Thank you. This is just perfect. Maybe someone know about VTS areas information (calling channel, name of the area), is it available somewhere or should it be done only by user layer feature(something like in attached pic below)?
skalarx, Good day, You can download the weather forecast from this website https://openskiron.org/en/openwrf The connection to TimeZero website is blocked to avoid software issue
Thanks a lot ! Can't wait to try ! Edit: Followed to guide and not connected to internet but it exits everytime I type activation code. It just says "Exiting".
Kwifi, Good day, Go to C:\ProgramData\CrypKey\Licenses and delete the folder containing the serial key. Try again with another SC AND AC licence generated with the keygen.
You cannot post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
TimeZero Navigator V 4.2.0.133
Year: 2022
Version: 4.2.0.133
Developer: Nobeltec & MaxSea
Platform: Windows
System Requirements: The following system requirements must be fulfilled to run TimeZero v4 Navigator:
Microsoft® Windows® 7 SP1, or Windows® 8.1 or Windows® 10
1.5 GHz processor (Intel i5 recommended)
4GB RAM
Video card:
Minimum - Integrated Intel Graphic Chipset (HD Series)
Recommended - Dedicated Graphics with 1GB VRAM or Intel HD 4th Generation or above
Screen resolution: 1024 x 600 (1280 x 800 or higher recommended)
Hard Drive: 30 GB free space
A USB port or a Serial port for instruments using the NMEA183 protocol, an Actisense USB NGT-1 for those using the NMEA2000 protocol or a 100 Base-T Network Card for devices connected by Ethernet (such as the Furuno FA30, etc.)
Localization: english
Crack: Included
Description: The functionalities of the TZ Navigator navigation software have been developed with two major objectives: total control and user comfort and with the following optimization axes: safety and simplicity.
TimeZero technology benefits from global coverage and smooth and fast mapping in which mapping, 3D data and aerial photos are merged.
The user interface is intuitive and suitable for use on touch screens.
Via a simple Ethernet connection, it is compatible with any Furuno NavNet system. This makes it possible to superimpose the radar image directly on the map (optional TZ Radar module) or to take advantage of the features of the Furuno sonars on the PC: real-time ultrasound, fish detection, bottom discrimination (optional TZ sonar module).
In a motorboat, advanced route management, safety cone and AIS functions allow a serene sea trip without laborious preparation.
When sailing, the TimeZero navigation software allows you to plan and enjoy beautiful sailings safely thanks to its many tools (WP, roads, tides, weather forecasts, AIS/ARPA function). With the optional weather routing module, it is possible to calculate the best route based on the weather forecast and the polars of the boat.
Additional info:
On windows defender , allow The Keygen MaxLicV4Nav. and MX_TZ v4PRO_crack_SplahScreen before downloading.
Installation instructions:
1.Turn off internet connection
2.start the installer "InstallNavigator4.2.0.133" ,when installtion completed uncheck the "Do you want to Run TimeZero" and close the popup window.
3.Run "MX_TZ v4PRO_crack_SplahScreen.bat" and press continue. it will automatically close.
4.Run "Block Host.cmd" to avoid the UM code issue every time you execute TIMEZERO.
5.Run the keygen "MaxLicV4Nav.exe" and TZ4 application .
generate your serial number and put it on tz , press next you will see the SC code on the second window
copy paste in the keygen and generate the AC code.
Congratulation installation completed.
enjoy it.
Note: The keygen allow you to generate the chart serial key.
Big thanks to all contributors from https://www.gpspower.net/ forum .
Screenshots
Any optional modules (Sonar etc) ?
Available modules with the provided keygen
you will find this UM Code : C8521D9DB6196B5F0053
click me
Where can I find charts?
Best regards
From TimeZero official website
https://mytimezero.com/charts-catalog/list
Download the UC's code file containing all the charts , after Downloading your chart's , during installation TimeZero will request for the code
excel file : https://mega.nz/file/fjABybYY#2...RtDFinTVDE2_GY9s
And again Big thanks to all contributors from https://www.gpspower.net/ forum .
You have to register in Marinetraffic website and request your free API kEY from TimeZero Application.
click me
Enjoy.
everything works smooth
Maybe someone know about VTS areas information (calling channel, name of the area), is it available somewhere or should it be done only by user layer feature(something like in attached pic below)?
click me
If you need more informations , you have to double click on the TSS arrow
But it better to always refer to Sailing Directions.
click me
You can download the weather forecast from this website https://openskiron.org/en/openwrf
The connection to TimeZero website is blocked to avoid software issue
When is safe to turn it on again?
Edit: Followed to guide and not connected to internet but it exits everytime I type activation code. It just says "Exiting".
You can run your internet connection when you complete installation
Go to C:\ProgramData\CrypKey\Licenses and delete the folder containing the serial key.
Try again with another SC AND AC licence generated with the keygen.